⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Ada County › Eagle (83616)

Eagle, ID (83616): well depth, water level & drilling cost

✓ 2,059 IDWR records · Ada County

130 ftmedian well depth
86 ft–213 fttypical depth range
40 ftmedian static water level
50 gpmmedian yield (1,342 tests)

Pull every recorded well near a Eagle (83616) address — $49

How deep are wells in and around Eagle (83616), Idaho?

The median drilled well depth in and around Eagle (83616) is 130 ft, based on 1,357 wells with recorded depths in the state IDWR database. Half fall between 86 ft and 213 ft; 90% are shallower than 320 ft.

How much does it cost to drill a well in and around Eagle (83616)?

Applying published per-foot rates to the local median depth of 170 ft: drilling and casing alone typically runs $4,250–$11,050; a complete system including pump, pressure tank, and hookup typically runs $10,200–$17,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Eagle (83616)?

The median static water level is 40 ft below ground surface (middle half of wells: 14 ft–80 ft), from 1,774 measurements.

Drilled depth distribution

0–50 ft 105 50–100 ft 332 100–150 ft 354 150–200 ft 188 200–300 ft 216 300–400 ft 86 400–600 ft 66 600+ ft 10
Looking at a specific property in Eagle (83616)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Eagle (83616)

Free. Goes to licensed drillers working Ada County.

Part of Ada County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.