⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Ada County

Ada County, Idaho: well depth, water level & drilling cost

✓ 18,374 IDWR records · verified 2026-10-12

130 ftmedian well depth
80 ft–223 fttypical depth range
40 ftmedian static water level
42 gpmmedian yield (10,228 tests)

Pull every recorded well near a Ada County address — $49

How deep are wells in Ada County, Idaho?

The median drilled well depth in Ada County is 130 ft, based on 12,280 wells with recorded depths in the state IDWR database. Half of all wells fall between 80 ft and 223 ft; 90% are shallower than 368 ft. Wells drilled since 2016 have a median depth of 180 ft.

How much does it cost to drill a well in Ada County?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Ada County?

The median static water level is 40 ft below ground surface (middle half of wells: 17 ft–85 ft), from 15,732 measurements.

How much water do wells in Ada County produce?

The median tested yield is 42 gpm (middle half: 25 gpm–75 gpm), from 10,228 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 1,125 50–100 ft 3,279 100–150 ft 2,551 150–200 ft 1,629 200–300 ft 1,808 300–400 ft 803 400–600 ft 767 600+ ft 318
Looking at a specific property in Ada County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Ada County

Free. Goes to licensed drillers working Ada County.

Well records by ZIP code in Ada County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.