⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Benewah County › Plummer (83851)

Plummer, ID (83851): well depth, water level & drilling cost

✓ 624 IDWR records · Benewah County

345 ftmedian well depth
245 ft–502 fttypical depth range
80 ftmedian static water level
15 gpmmedian yield (540 tests)

Pull every recorded well near a Plummer (83851) address — $49

How deep are wells in and around Plummer (83851), Idaho?

The median drilled well depth in and around Plummer (83851) is 345 ft, based on 336 wells with recorded depths in the state IDWR database. Half fall between 245 ft and 502 ft; 90% are shallower than 605 ft.

How much does it cost to drill a well in and around Plummer (83851)?

Applying published per-foot rates to the local median depth of 345 ft: drilling and casing alone typically runs $8,625–$22,425; a complete system including pump, pressure tank, and hookup typically runs $20,700–$34,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Plummer (83851)?

The median static water level is 80 ft below ground surface (middle half of wells: 44 ft–150 ft), from 553 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 3 100–150 ft 13 150–200 ft 15 200–300 ft 86 300–400 ft 74 400–600 ft 96 600+ ft 49
Looking at a specific property in Plummer (83851)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Plummer (83851)

Free. Goes to licensed drillers working Benewah County.

Part of Benewah County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.