Idaho Well Data › Shoshone County › Kingston (83839)
Kingston, ID (83839): well depth, water level & drilling cost
✓ 191 IDWR records · Shoshone County
Pull every recorded well near a Kingston (83839) address — $49
How deep are wells in and around Kingston (83839), Idaho?
The median drilled well depth in and around Kingston (83839) is 300 ft, based on 90 wells with recorded depths in the state IDWR database. Half fall between 185 ft and 400 ft; 90% are shallower than 503 ft.
How much does it cost to drill a well in and around Kingston (83839)?
Applying published per-foot rates to the local median depth of 300 ft: drilling and casing alone typically runs $7,500–$19,500; a complete system including pump, pressure tank, and hookup typically runs $18,000–$30,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Kingston (83839)?
The median static water level is 51 ft below ground surface (middle half of wells: 16 ft–104 ft), from 161 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Shoshone County.
Part of Shoshone County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.