⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Kootenai County › Hayden (83835)

Hayden, ID (83835): well depth, water level & drilling cost

✓ 1,079 IDWR records · Kootenai County

334 ftmedian well depth
228 ft–490 fttypical depth range
100 ftmedian static water level
10 gpmmedian yield (916 tests)

Pull every recorded well near a Hayden (83835) address — $49

How deep are wells in and around Hayden (83835), Idaho?

The median drilled well depth in and around Hayden (83835) is 334 ft, based on 455 wells with recorded depths in the state IDWR database. Half fall between 228 ft and 490 ft; 90% are shallower than 720 ft.

How much does it cost to drill a well in and around Hayden (83835)?

Applying published per-foot rates to the local median depth of 334 ft: drilling and casing alone typically runs $8,350–$21,710; a complete system including pump, pressure tank, and hookup typically runs $20,040–$33,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hayden (83835)?

The median static water level is 100 ft below ground surface (middle half of wells: 46 ft–205 ft), from 918 measurements.

Drilled depth distribution

0–50 ft 2 50–100 ft 6 100–150 ft 33 150–200 ft 32 200–300 ft 98 300–400 ft 111 400–600 ft 95 600+ ft 78
Looking at a specific property in Hayden (83835)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hayden (83835)

Free. Goes to licensed drillers working Kootenai County.

Part of Kootenai County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.