⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Latah County › Deary (83823)

Deary, ID (83823): well depth, water level & drilling cost

✓ 443 IDWR records · Latah County

280 ftmedian well depth
200 ft–380 fttypical depth range
112 ftmedian static water level
20 gpmmedian yield (400 tests)

Pull every recorded well near a Deary (83823) address — $49

How deep are wells in and around Deary (83823), Idaho?

The median drilled well depth in and around Deary (83823) is 280 ft, based on 258 wells with recorded depths in the state IDWR database. Half fall between 200 ft and 380 ft; 90% are shallower than 440 ft.

How much does it cost to drill a well in and around Deary (83823)?

Applying published per-foot rates to the local median depth of 280 ft: drilling and casing alone typically runs $7,000–$18,200; a complete system including pump, pressure tank, and hookup typically runs $16,800–$28,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Deary (83823)?

The median static water level is 112 ft below ground surface (middle half of wells: 65 ft–194 ft), from 409 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 4 100–150 ft 21 150–200 ft 31 200–300 ft 76 300–400 ft 71 400–600 ft 52 600+ ft 3
Looking at a specific property in Deary (83823)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Deary (83823)

Free. Goes to licensed drillers working Latah County.

Part of Latah County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.