⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Bonner County › Oldtown (83822)

Oldtown, ID (83822): well depth, water level & drilling cost

✓ 963 IDWR records · Bonner County

190 ftmedian well depth
120 ft–320 fttypical depth range
86 ftmedian static water level
10 gpmmedian yield (866 tests)

Pull every recorded well near a Oldtown (83822) address — $49

How deep are wells in and around Oldtown (83822), Idaho?

The median drilled well depth in and around Oldtown (83822) is 190 ft, based on 473 wells with recorded depths in the state IDWR database. Half fall between 120 ft and 320 ft; 90% are shallower than 500 ft.

How much does it cost to drill a well in and around Oldtown (83822)?

Applying published per-foot rates to the local median depth of 222 ft: drilling and casing alone typically runs $5,550–$14,430; a complete system including pump, pressure tank, and hookup typically runs $13,320–$22,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Oldtown (83822)?

The median static water level is 86 ft below ground surface (middle half of wells: 45 ft–150 ft), from 904 measurements.

Drilled depth distribution

0–50 ft 12 50–100 ft 72 100–150 ft 82 150–200 ft 81 200–300 ft 96 300–400 ft 56 400–600 ft 44 600+ ft 30
Looking at a specific property in Oldtown (83822)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Oldtown (83822)

Free. Goes to licensed drillers working Bonner County.

Part of Bonner County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.