Idaho Well Data › Bonner County › Clark Fork (83811)
Clark Fork, ID (83811): well depth, water level & drilling cost
✓ 617 IDWR records · Bonner County
Pull every recorded well near a Clark Fork (83811) address — $49
How deep are wells in and around Clark Fork (83811), Idaho?
The median drilled well depth in and around Clark Fork (83811) is 180 ft, based on 336 wells with recorded depths in the state IDWR database. Half fall between 60 ft and 298 ft; 90% are shallower than 440 ft.
How much does it cost to drill a well in and around Clark Fork (83811)?
Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Clark Fork (83811)?
The median static water level is 40 ft below ground surface (middle half of wells: 18 ft–155 ft), from 565 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Bonner County.
Part of Bonner County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.