⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Kootenai County › Cataldo (83810)

Cataldo, ID (83810): well depth, water level & drilling cost

✓ 356 IDWR records · Kootenai County

247 ftmedian well depth
144 ft–364 fttypical depth range
35 ftmedian static water level
12 gpmmedian yield (330 tests)

Pull every recorded well near a Cataldo (83810) address — $49

How deep are wells in and around Cataldo (83810), Idaho?

The median drilled well depth in and around Cataldo (83810) is 247 ft, based on 144 wells with recorded depths in the state IDWR database. Half fall between 144 ft and 364 ft; 90% are shallower than 471 ft.

How much does it cost to drill a well in and around Cataldo (83810)?

Applying published per-foot rates to the local median depth of 247 ft: drilling and casing alone typically runs $6,175–$16,055; a complete system including pump, pressure tank, and hookup typically runs $14,820–$24,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Cataldo (83810)?

The median static water level is 35 ft below ground surface (middle half of wells: 16 ft–70 ft), from 328 measurements.

Drilled depth distribution

0–50 ft 8 50–100 ft 11 100–150 ft 19 150–200 ft 14 200–300 ft 40 300–400 ft 20 400–600 ft 26 600+ ft 6
Looking at a specific property in Cataldo (83810)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Cataldo (83810)

Free. Goes to licensed drillers working Kootenai County.

Part of Kootenai County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.