⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Canyon County › Nampa (83653)

Nampa, ID (83653): well depth, water level & drilling cost

✓ 812 IDWR records · Canyon County

195 ftmedian well depth
140 ft–305 fttypical depth range
80 ftmedian static water level
50 gpmmedian yield (568 tests)

Pull every recorded well near a Nampa (83653) address — $49

How deep are wells in and around Nampa (83653), Idaho?

The median drilled well depth in and around Nampa (83653) is 195 ft, based on 561 wells with recorded depths in the state IDWR database. Half fall between 140 ft and 305 ft; 90% are shallower than 432 ft.

How much does it cost to drill a well in and around Nampa (83653)?

Applying published per-foot rates to the local median depth of 195 ft: drilling and casing alone typically runs $4,875–$12,675; a complete system including pump, pressure tank, and hookup typically runs $11,700–$19,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Nampa (83653)?

The median static water level is 80 ft below ground surface (middle half of wells: 45 ft–130 ft), from 734 measurements.

Drilled depth distribution

0–50 ft 3 50–100 ft 56 100–150 ft 108 150–200 ft 123 200–300 ft 124 300–400 ft 76 400–600 ft 42 600+ ft 29
Looking at a specific property in Nampa (83653)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Nampa (83653)

Free. Goes to licensed drillers working Canyon County.

Part of Canyon County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.