Idaho Well Data › Owyhee County › Marsing (83639)
Marsing, ID (83639): well depth, water level & drilling cost
✓ 1,203 IDWR records · Owyhee County
Pull every recorded well near a Marsing (83639) address — $49
How deep are wells in and around Marsing (83639), Idaho?
The median drilled well depth in and around Marsing (83639) is 196 ft, based on 856 wells with recorded depths in the state IDWR database. Half fall between 121 ft and 307 ft; 90% are shallower than 525 ft.
How much does it cost to drill a well in and around Marsing (83639)?
Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Marsing (83639)?
The median static water level is 35 ft below ground surface (middle half of wells: 20 ft–70 ft), from 1,126 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Owyhee County.
Part of Owyhee County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.