⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Valley County › Mccall (83638)

Mccall, ID (83638): well depth, water level & drilling cost

✓ 1,667 IDWR records · Valley County

157 ftmedian well depth
95 ft–220 fttypical depth range
39 ftmedian static water level
20 gpmmedian yield (1,385 tests)

Pull every recorded well near a Mccall (83638) address — $49

How deep are wells in and around Mccall (83638), Idaho?

The median drilled well depth in and around Mccall (83638) is 157 ft, based on 1,089 wells with recorded depths in the state IDWR database. Half fall between 95 ft and 220 ft; 90% are shallower than 295 ft.

How much does it cost to drill a well in and around Mccall (83638)?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Mccall (83638)?

The median static water level is 39 ft below ground surface (middle half of wells: 17 ft–88 ft), from 1,512 measurements.

Drilled depth distribution

0–50 ft 76 50–100 ft 221 100–150 ft 216 150–200 ft 211 200–300 ft 260 300–400 ft 78 400–600 ft 23 600+ ft 4
Looking at a specific property in Mccall (83638)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Mccall (83638)

Free. Goes to licensed drillers working Valley County.

Part of Valley County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.