⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Boise County › Lowman (83637)

Lowman, ID (83637): well depth, water level & drilling cost

✓ 233 IDWR records · Boise County

160 ftmedian well depth
88 ft–280 fttypical depth range
30 ftmedian static water level
14 gpmmedian yield (186 tests)

Pull every recorded well near a Lowman (83637) address — $49

How deep are wells in and around Lowman (83637), Idaho?

The median drilled well depth in and around Lowman (83637) is 160 ft, based on 130 wells with recorded depths in the state IDWR database. Half fall between 88 ft and 280 ft; 90% are shallower than 425 ft.

How much does it cost to drill a well in and around Lowman (83637)?

Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Lowman (83637)?

The median static water level is 30 ft below ground surface (middle half of wells: 18 ft–56 ft), from 199 measurements.

Drilled depth distribution

0–50 ft 8 50–100 ft 32 100–150 ft 22 150–200 ft 11 200–300 ft 28 300–400 ft 12 400–600 ft 16 600+ ft 1
Looking at a specific property in Lowman (83637)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Lowman (83637)

Free. Goes to licensed drillers working Boise County.

Part of Boise County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.