Idaho Well Data › Elmore County › King Hill (83633)
King Hill, ID (83633): well depth, water level & drilling cost
✓ 132 IDWR records · Elmore County
Pull every recorded well near a King Hill (83633) address — $49
How deep are wells in and around King Hill (83633), Idaho?
The median drilled well depth in and around King Hill (83633) is 260 ft, based on 110 wells with recorded depths in the state IDWR database. Half fall between 156 ft and 439 ft; 90% are shallower than 600 ft.
How much does it cost to drill a well in and around King Hill (83633)?
Applying published per-foot rates to the local median depth of 260 ft: drilling and casing alone typically runs $6,500–$16,900; a complete system including pump, pressure tank, and hookup typically runs $15,600–$26,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around King Hill (83633)?
The median static water level is 125 ft below ground surface (middle half of wells: 65 ft–198 ft), from 121 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Elmore County.
Part of Elmore County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.