⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Nez Perce County › Lapwai (83540)

Lapwai, ID (83540): well depth, water level & drilling cost

✓ 278 IDWR records · Nez Perce County

216 ftmedian well depth
145 ft–320 fttypical depth range
50 ftmedian static water level
30 gpmmedian yield (247 tests)

Pull every recorded well near a Lapwai (83540) address — $49

How deep are wells in and around Lapwai (83540), Idaho?

The median drilled well depth in and around Lapwai (83540) is 216 ft, based on 106 wells with recorded depths in the state IDWR database. Half fall between 145 ft and 320 ft; 90% are shallower than 435 ft.

How much does it cost to drill a well in and around Lapwai (83540)?

Applying published per-foot rates to the local median depth of 216 ft: drilling and casing alone typically runs $5,400–$14,040; a complete system including pump, pressure tank, and hookup typically runs $12,960–$21,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Lapwai (83540)?

The median static water level is 50 ft below ground surface (middle half of wells: 23 ft–128 ft), from 249 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 5 100–150 ft 21 150–200 ft 16 200–300 ft 30 300–400 ft 18 400–600 ft 11 600+ ft 4
Looking at a specific property in Lapwai (83540)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Lapwai (83540)

Free. Goes to licensed drillers working Nez Perce County.

Part of Nez Perce County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.