⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Idaho County › Kamiah (83536)

Kamiah, ID (83536): well depth, water level & drilling cost

✓ 882 IDWR records · Idaho County

334 ftmedian well depth
222 ft–500 fttypical depth range
120 ftmedian static water level
15 gpmmedian yield (794 tests)

Pull every recorded well near a Kamiah (83536) address — $49

How deep are wells in and around Kamiah (83536), Idaho?

The median drilled well depth in and around Kamiah (83536) is 334 ft, based on 428 wells with recorded depths in the state IDWR database. Half fall between 222 ft and 500 ft; 90% are shallower than 722 ft.

How much does it cost to drill a well in and around Kamiah (83536)?

Applying published per-foot rates to the local median depth of 334 ft: drilling and casing alone typically runs $8,350–$21,710; a complete system including pump, pressure tank, and hookup typically runs $20,040–$33,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Kamiah (83536)?

The median static water level is 120 ft below ground surface (middle half of wells: 60 ft–240 ft), from 794 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 13 100–150 ft 27 150–200 ft 38 200–300 ft 99 300–400 ft 69 400–600 ft 98 600+ ft 83
Looking at a specific property in Kamiah (83536)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Kamiah (83536)

Free. Goes to licensed drillers working Idaho County.

Part of Idaho County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.