Idaho Well Data › Clearwater County › Ahsahka (83520)
Ahsahka, ID (83520): well depth, water level & drilling cost
✓ 392 IDWR records · Clearwater County
Pull every recorded well near a Ahsahka (83520) address — $49
How deep are wells in and around Ahsahka (83520), Idaho?
The median drilled well depth in and around Ahsahka (83520) is 325 ft, based on 235 wells with recorded depths in the state IDWR database. Half fall between 225 ft and 425 ft; 90% are shallower than 550 ft.
How much does it cost to drill a well in and around Ahsahka (83520)?
Applying published per-foot rates to the local median depth of 325 ft: drilling and casing alone typically runs $8,125–$21,125; a complete system including pump, pressure tank, and hookup typically runs $19,500–$32,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Ahsahka (83520)?
The median static water level is 140 ft below ground surface (middle half of wells: 74 ft–230 ft), from 340 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Clearwater County.
Part of Clearwater County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.