⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Lemhi County › Lemhi (83465)

Lemhi, ID (83465): well depth, water level & drilling cost

✓ 168 IDWR records · Lemhi County

70 ftmedian well depth
44 ft–145 fttypical depth range
20 ftmedian static water level
20 gpmmedian yield (110 tests)

Pull every recorded well near a Lemhi (83465) address — $49

How deep are wells in and around Lemhi (83465), Idaho?

The median drilled well depth in and around Lemhi (83465) is 70 ft, based on 131 wells with recorded depths in the state IDWR database. Half fall between 44 ft and 145 ft; 90% are shallower than 210 ft.

How much does it cost to drill a well in and around Lemhi (83465)?

Applying published per-foot rates to the local median depth of 70 ft: drilling and casing alone typically runs $1,750–$4,550; a complete system including pump, pressure tank, and hookup typically runs $4,200–$7,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Lemhi (83465)?

The median static water level is 20 ft below ground surface (middle half of wells: 10 ft–32 ft), from 159 measurements.

Drilled depth distribution

0–50 ft 40 50–100 ft 45 100–150 ft 16 150–200 ft 8 200–300 ft 16 300–400 ft 3 400–600 ft 2 600+ ft 1
Looking at a specific property in Lemhi (83465)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Lemhi (83465)

Free. Goes to licensed drillers working Lemhi County.

Part of Lemhi County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.