Idaho Well Data › Jefferson County › Monteview (83435)
Monteview, ID (83435): well depth, water level & drilling cost
✓ 437 IDWR records · Jefferson County
Pull every recorded well near a Monteview (83435) address — $49
How deep are wells in and around Monteview (83435), Idaho?
The median drilled well depth in and around Monteview (83435) is 256 ft, based on 359 wells with recorded depths in the state IDWR database. Half fall between 150 ft and 344 ft; 90% are shallower than 436 ft.
How much does it cost to drill a well in and around Monteview (83435)?
Applying published per-foot rates to the local median depth of 256 ft: drilling and casing alone typically runs $6,400–$16,640; a complete system including pump, pressure tank, and hookup typically runs $15,360–$25,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Monteview (83435)?
The median static water level is 90 ft below ground surface (middle half of wells: 45 ft–180 ft), from 394 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Jefferson County.
Part of Jefferson County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.