⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Teton County › Felt (83424)

Felt, ID (83424): well depth, water level & drilling cost

✓ 654 IDWR records · Teton County

320 ftmedian well depth
204 ft–470 fttypical depth range
140 ftmedian static water level
15 gpmmedian yield (273 tests)

Pull every recorded well near a Felt (83424) address — $49

How deep are wells in and around Felt (83424), Idaho?

The median drilled well depth in and around Felt (83424) is 320 ft, based on 537 wells with recorded depths in the state IDWR database. Half fall between 204 ft and 470 ft; 90% are shallower than 600 ft.

How much does it cost to drill a well in and around Felt (83424)?

Applying published per-foot rates to the local median depth of 300 ft: drilling and casing alone typically runs $7,500–$19,500; a complete system including pump, pressure tank, and hookup typically runs $18,000–$30,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Felt (83424)?

The median static water level is 140 ft below ground surface (middle half of wells: 79 ft–240 ft), from 619 measurements.

Drilled depth distribution

0–50 ft 3 50–100 ft 16 100–150 ft 56 150–200 ft 41 200–300 ft 119 300–400 ft 84 400–600 ft 162 600+ ft 56
Looking at a specific property in Felt (83424)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Felt (83424)

Free. Goes to licensed drillers working Teton County.

Part of Teton County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.