⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Minidoka County › Paul (83347)

Paul, ID (83347): well depth, water level & drilling cost

✓ 1,246 IDWR records · Minidoka County

260 ftmedian well depth
140 ft–388 fttypical depth range
186 ftmedian static water level
20 gpmmedian yield (444 tests)

Pull every recorded well near a Paul (83347) address — $49

How deep are wells in and around Paul (83347), Idaho?

The median drilled well depth in and around Paul (83347) is 260 ft, based on 897 wells with recorded depths in the state IDWR database. Half fall between 140 ft and 388 ft; 90% are shallower than 467 ft.

How much does it cost to drill a well in and around Paul (83347)?

Applying published per-foot rates to the local median depth of 260 ft: drilling and casing alone typically runs $6,500–$16,900; a complete system including pump, pressure tank, and hookup typically runs $15,600–$26,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Paul (83347)?

The median static water level is 186 ft below ground surface (middle half of wells: 56 ft–282 ft), from 1,142 measurements.

Drilled depth distribution

0–50 ft 89 50–100 ft 54 100–150 ft 93 150–200 ft 92 200–300 ft 188 300–400 ft 178 400–600 ft 188 600+ ft 15
Looking at a specific property in Paul (83347)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Paul (83347)

Free. Goes to licensed drillers working Minidoka County.

Part of Minidoka County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.