Idaho Well Data › Minidoka County › Minidoka (83343)
Minidoka, ID (83343): well depth, water level & drilling cost
✓ 554 IDWR records · Minidoka County
Pull every recorded well near a Minidoka (83343) address — $49
How deep are wells in and around Minidoka (83343), Idaho?
The median drilled well depth in and around Minidoka (83343) is 273 ft, based on 432 wells with recorded depths in the state IDWR database. Half fall between 222 ft and 338 ft; 90% are shallower than 390 ft.
How much does it cost to drill a well in and around Minidoka (83343)?
Applying published per-foot rates to the local median depth of 273 ft: drilling and casing alone typically runs $6,825–$17,745; a complete system including pump, pressure tank, and hookup typically runs $16,380–$27,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Minidoka (83343)?
The median static water level is 202 ft below ground surface (middle half of wells: 171 ft–234 ft), from 505 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Minidoka County.
Part of Minidoka County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.