⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Jerome County › Jerome (83338)

Jerome, ID (83338): well depth, water level & drilling cost

✓ 3,044 IDWR records · Jerome County

250 ftmedian well depth
213 ft–310 fttypical depth range
183 ftmedian static water level
20 gpmmedian yield (403 tests)

Pull every recorded well near a Jerome (83338) address — $49

How deep are wells in and around Jerome (83338), Idaho?

The median drilled well depth in and around Jerome (83338) is 250 ft, based on 2,214 wells with recorded depths in the state IDWR database. Half fall between 213 ft and 310 ft; 90% are shallower than 400 ft.

How much does it cost to drill a well in and around Jerome (83338)?

Applying published per-foot rates to the local median depth of 258 ft: drilling and casing alone typically runs $6,450–$16,770; a complete system including pump, pressure tank, and hookup typically runs $15,480–$25,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Jerome (83338)?

The median static water level is 183 ft below ground surface (middle half of wells: 140 ft–242 ft), from 2,826 measurements.

Drilled depth distribution

0–50 ft 11 50–100 ft 23 100–150 ft 73 150–200 ft 272 200–300 ft 1,154 300–400 ft 454 400–600 ft 193 600+ ft 34
Looking at a specific property in Jerome (83338)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Jerome (83338)

Free. Goes to licensed drillers working Jerome County.

Part of Jerome County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.