⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Camas County › Hill City (83337)

Hill City, ID (83337): well depth, water level & drilling cost

✓ 144 IDWR records · Camas County

145 ftmedian well depth
100 ft–211 fttypical depth range
20 ftmedian static water level
20 gpmmedian yield (77 tests)

Pull every recorded well near a Hill City (83337) address — $49

How deep are wells in and around Hill City (83337), Idaho?

The median drilled well depth in and around Hill City (83337) is 145 ft, based on 118 wells with recorded depths in the state IDWR database. Half fall between 100 ft and 211 ft; 90% are shallower than 313 ft.

How much does it cost to drill a well in and around Hill City (83337)?

Applying published per-foot rates to the local median depth of 145 ft: drilling and casing alone typically runs $3,625–$9,425; a complete system including pump, pressure tank, and hookup typically runs $8,700–$14,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hill City (83337)?

The median static water level is 20 ft below ground surface (middle half of wells: 12 ft–38 ft), from 122 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 27 100–150 ft 34 150–200 ft 13 200–300 ft 29 300–400 ft 6 400–600 ft 6 600+ ft 2
Looking at a specific property in Hill City (83337)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hill City (83337)

Free. Goes to licensed drillers working Camas County.

Part of Camas County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.