⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Minidoka County › Heyburn (83336)

Heyburn, ID (83336): well depth, water level & drilling cost

✓ 1,313 IDWR records · Minidoka County

63 ftmedian well depth
34 ft–93 fttypical depth range
13 ftmedian static water level
20 gpmmedian yield (800 tests)

Pull every recorded well near a Heyburn (83336) address — $49

How deep are wells in and around Heyburn (83336), Idaho?

The median drilled well depth in and around Heyburn (83336) is 63 ft, based on 953 wells with recorded depths in the state IDWR database. Half fall between 34 ft and 93 ft; 90% are shallower than 180 ft.

How much does it cost to drill a well in and around Heyburn (83336)?

Applying published per-foot rates to the local median depth of 63 ft: drilling and casing alone typically runs $1,575–$4,095; a complete system including pump, pressure tank, and hookup typically runs $3,780–$6,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Heyburn (83336)?

The median static water level is 13 ft below ground surface (middle half of wells: 8 ft–28 ft), from 1,259 measurements.

Drilled depth distribution

0–50 ft 383 50–100 ft 364 100–150 ft 93 150–200 ft 26 200–300 ft 55 300–400 ft 14 400–600 ft 18 600+ ft 0
Looking at a specific property in Heyburn (83336)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Heyburn (83336)

Free. Goes to licensed drillers working Minidoka County.

Part of Minidoka County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.