Idaho Well Data › Twin Falls County › Hansen (83334)
Hansen, ID (83334): well depth, water level & drilling cost
✓ 310 IDWR records · Twin Falls County
Pull every recorded well near a Hansen (83334) address — $49
How deep are wells in and around Hansen (83334), Idaho?
The median drilled well depth in and around Hansen (83334) is 340 ft, based on 239 wells with recorded depths in the state IDWR database. Half fall between 221 ft and 355 ft; 90% are shallower than 510 ft.
How much does it cost to drill a well in and around Hansen (83334)?
Applying published per-foot rates to the local median depth of 340 ft: drilling and casing alone typically runs $8,500–$22,100; a complete system including pump, pressure tank, and hookup typically runs $20,400–$34,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Hansen (83334)?
The median static water level is 195 ft below ground surface (middle half of wells: 79 ft–225 ft), from 287 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Twin Falls County.
Part of Twin Falls County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.