⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Franklin County › Swanlake (83281)

Swanlake, ID (83281): well depth, water level & drilling cost

✓ 67 IDWR records · Franklin County

160 ftmedian well depth
120 ft–248 fttypical depth range
37 ftmedian static water level
35 gpmmedian yield (37 tests)

Pull every recorded well near a Swanlake (83281) address — $49

How deep are wells in and around Swanlake (83281), Idaho?

The median drilled well depth in and around Swanlake (83281) is 160 ft, based on 47 wells with recorded depths in the state IDWR database. Half fall between 120 ft and 248 ft; 90% are shallower than 360 ft.

How much does it cost to drill a well in and around Swanlake (83281)?

Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Swanlake (83281)?

The median static water level is 37 ft below ground surface (middle half of wells: 20 ft–68 ft), from 61 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 3 100–150 ft 16 150–200 ft 11 200–300 ft 8 300–400 ft 5 400–600 ft 3 600+ ft 0
Looking at a specific property in Swanlake (83281)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Swanlake (83281)

Free. Goes to licensed drillers working Franklin County.

Part of Franklin County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.