Idaho Well Data › Bear Lake County › Saint Charles (83272)
Saint Charles, ID (83272): well depth, water level & drilling cost
✓ 114 IDWR records · Bear Lake County
Pull every recorded well near a Saint Charles (83272) address — $49
How deep are wells in and around Saint Charles (83272), Idaho?
The median drilled well depth in and around Saint Charles (83272) is 216 ft, based on 94 wells with recorded depths in the state IDWR database. Half fall between 141 ft and 320 ft; 90% are shallower than 417 ft.
How much does it cost to drill a well in and around Saint Charles (83272)?
Applying published per-foot rates to the local median depth of 216 ft: drilling and casing alone typically runs $5,400–$14,040; a complete system including pump, pressure tank, and hookup typically runs $12,960–$21,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Saint Charles (83272)?
The median static water level is 43 ft below ground surface (middle half of wells: 25 ft–81 ft), from 101 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Bear Lake County.
Part of Bear Lake County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.