⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Butte County › Howe (83244)

Howe, ID (83244): well depth, water level & drilling cost

✓ 259 IDWR records · Butte County

163 ftmedian well depth
128 ft–256 fttypical depth range
77 ftmedian static water level
30 gpmmedian yield (83 tests)

Pull every recorded well near a Howe (83244) address — $49

How deep are wells in and around Howe (83244), Idaho?

The median drilled well depth in and around Howe (83244) is 163 ft, based on 216 wells with recorded depths in the state IDWR database. Half fall between 128 ft and 256 ft; 90% are shallower than 413 ft.

How much does it cost to drill a well in and around Howe (83244)?

Applying published per-foot rates to the local median depth of 163 ft: drilling and casing alone typically runs $4,075–$10,595; a complete system including pump, pressure tank, and hookup typically runs $9,780–$16,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Howe (83244)?

The median static water level is 77 ft below ground surface (middle half of wells: 59 ft–120 ft), from 242 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 22 100–150 ft 64 150–200 ft 39 200–300 ft 48 300–400 ft 17 400–600 ft 18 600+ ft 7
Looking at a specific property in Howe (83244)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Howe (83244)

Free. Goes to licensed drillers working Butte County.

Part of Butte County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.