Idaho Well Data › Bear Lake County › Georgetown (83239)
Georgetown, ID (83239): well depth, water level & drilling cost
✓ 137 IDWR records · Bear Lake County
Pull every recorded well near a Georgetown (83239) address — $49
How deep are wells in and around Georgetown (83239), Idaho?
The median drilled well depth in and around Georgetown (83239) is 180 ft, based on 93 wells with recorded depths in the state IDWR database. Half fall between 115 ft and 240 ft; 90% are shallower than 348 ft.
How much does it cost to drill a well in and around Georgetown (83239)?
Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Georgetown (83239)?
The median static water level is 39 ft below ground surface (middle half of wells: 19 ft–76 ft), from 104 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Bear Lake County.
Part of Bear Lake County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.