⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Franklin County › Dayton (83232)

Dayton, ID (83232): well depth, water level & drilling cost

✓ 102 IDWR records · Franklin County

255 ftmedian well depth
140 ft–308 fttypical depth range
50 ftmedian static water level
25 gpmmedian yield (76 tests)

Pull every recorded well near a Dayton (83232) address — $49

How deep are wells in and around Dayton (83232), Idaho?

The median drilled well depth in and around Dayton (83232) is 255 ft, based on 59 wells with recorded depths in the state IDWR database. Half fall between 140 ft and 308 ft; 90% are shallower than 401 ft.

How much does it cost to drill a well in and around Dayton (83232)?

Applying published per-foot rates to the local median depth of 255 ft: drilling and casing alone typically runs $6,375–$16,575; a complete system including pump, pressure tank, and hookup typically runs $15,300–$25,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Dayton (83232)?

The median static water level is 50 ft below ground surface (middle half of wells: 25 ft–75 ft), from 95 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 7 100–150 ft 9 150–200 ft 8 200–300 ft 16 300–400 ft 13 400–600 ft 5 600+ ft 1
Looking at a specific property in Dayton (83232)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Dayton (83232)

Free. Goes to licensed drillers working Franklin County.

Part of Franklin County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.