Idaho Well Data › Bingham County › Aberdeen (83210)
Aberdeen, ID (83210): well depth, water level & drilling cost
✓ 738 IDWR records · Bingham County
Pull every recorded well near a Aberdeen (83210) address — $49
How deep are wells in and around Aberdeen (83210), Idaho?
The median drilled well depth in and around Aberdeen (83210) is 166 ft, based on 560 wells with recorded depths in the state IDWR database. Half fall between 120 ft and 245 ft; 90% are shallower than 320 ft.
How much does it cost to drill a well in and around Aberdeen (83210)?
Applying published per-foot rates to the local median depth of 166 ft: drilling and casing alone typically runs $4,150–$10,790; a complete system including pump, pressure tank, and hookup typically runs $9,960–$16,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Aberdeen (83210)?
The median static water level is 47 ft below ground surface (middle half of wells: 27 ft–95 ft), from 674 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Bingham County.
Part of Bingham County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.