Idaho Well Data › Bannock County › Pocatello (83206)
Pocatello, ID (83206): well depth, water level & drilling cost
✓ 153 IDWR records · Bannock County
Pull every recorded well near a Pocatello (83206) address — $49
How deep are wells in and around Pocatello (83206), Idaho?
The median drilled well depth in and around Pocatello (83206) is 207 ft, based on 92 wells with recorded depths in the state IDWR database. Half fall between 116 ft and 350 ft; 90% are shallower than 400 ft.
How much does it cost to drill a well in and around Pocatello (83206)?
Applying published per-foot rates to the local median depth of 207 ft: drilling and casing alone typically runs $5,175–$13,455; a complete system including pump, pressure tank, and hookup typically runs $12,420–$20,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Pocatello (83206)?
The median static water level is 59 ft below ground surface (middle half of wells: 46 ft–205 ft), from 118 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Bannock County.
Part of Bannock County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.