⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Caribou County

Caribou County, Idaho: well depth, water level & drilling cost

✓ 1,658 IDWR records · verified 2026-08-21

160 ftmedian well depth
100 ft–240 fttypical depth range
57 ftmedian static water level
30 gpmmedian yield (787 tests)

How deep are wells in Caribou County, Idaho?

The median drilled well depth in Caribou County is 160 ft, based on 1,121 wells with recorded depths in the state IDWR database. Half of all wells fall between 100 ft and 240 ft; 90% are shallower than 320 ft. Wells drilled since 2016 have a median depth of 185 ft.

How much does it cost to drill a well in Caribou County?

Applying published per-foot rates to the local median depth of 185 ft: drilling and casing alone typically runs $4,625–$12,025; a complete system including pump, pressure tank, and hookup typically runs $11,100–$18,500. Actual quotes depend on site access, geology, and casing requirements.

Get quotes from drillers active in Caribou County

Free for property owners. We route your request only to licensed drillers who actually file well logs in Caribou County — never sold elsewhere.

What is the static water level in Caribou County?

The median static water level is 57 ft below ground surface (middle half of wells: 22 ft–122 ft), from 1,286 measurements.

How much water do wells in Caribou County produce?

The median tested yield is 30 gpm (middle half: 20 gpm–50 gpm), from 787 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Caribou County address — $29

Drilled depth distribution

0–50 ft 60 50–100 ft 200 100–150 ft 246 150–200 ft 173 200–300 ft 294 300–400 ft 85 400–600 ft 49 600+ ft 14
Looking at a specific property in Caribou County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $29

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.